Don’t pay more for the Internet! Do this and your Wi-Fi will improve.

Mostly these problems will be present in Wi-Fi. You’ll notice that the wireless signal isn’t reaching the area where it should be, that the speed is poor, or even that you can’t connect certain devices. The problem, at least in this case, is not what bet you made. For example, moving from 100 Mbit/s to 1 Gbit/s will not allow Wi-Fi goes further.

Prepare your connection

What we recommend you do before deciding to change the tariff For the more expensive option, it is important to prepare the connection well. This applies not only to the router, but also to the devices that you are going to connect to the network. You will have even more control over what is happening around you, as interference may occur and affect the signal.

Well find a router

The first thing you should do is find the router correctly. This will be the key to good communication. It is very important that the signal reaches everywhere well, avoiding dead spots and problems when you are about to connect your computer, mobile phone or any other device to the network. Always choose a good location and don’t place it anywhere.

For example, we recommend placing it in the central part of the house. From there you can distribute the signal better. Don’t place it in a corner, far from where you are going to connect devices. It is good if it is located on a raised platform, for example, on the top of furniture. Do not place it near windows or walls facing the street.

Set up your devices correctly

On the other hand, it is equally important that you have perfectly configured devices. Have you updated your computer’s network card? Do you have the latest version of your operating system? All of this will be key to preventing incompatibility and problems when connecting to the Internet.

When connecting wirelessly, always make sure you are using the appropriate band. In general, the 5GHz frequency provides the fastest speeds, although it is more sensitive to distance and obstacles. On the other hand, the 2.4 GHz frequency will allow you to connect from far away from the router.

Avoid Interference

In this case, you should do the following: avoid interference this may affect your connection. This will happen if, for example, you have certain devices nearby that prevent you from connecting to the network correctly. This can happen with a microwave oven because it uses the 2.4 GHz frequency, and also with a cordless phone, for example.

Ideally, you should move these devices as far away as possible. Do not place them near devices you intend to use for navigation. Even if you negotiate a higher speed, interference issues will still limit your wireless connection. Therefore, do not make mistakes and avoid these types of mistakes.

As you can see, connection preparation is necessary to achieve good speed. This way, you can avoid having to use wireless repeaters or pay for a higher tariff that won’t help you get better targeting. However, you can always review what you should consider when concluding an agreement on an Internet tariff.